HOME > PRODUCT > EORT/HASS Integrated Environment Testing Chamber > EORT/HASS Integrated Environment Testing Chamber > details
Product introduction
EORT-V Chamber has been admired by most advanced industries since its birth, and the users are very satisfied with the results of the EORT-V Chamber screening of product defect rate. Through the analysis of the screening data, they believe that the product will change the temperature and humidity quickly, and Under the comprehensive test of multi-axis vibration, the service life and potential defects of the product at the beginning of production or development can be screened out, because the defects can be quickly exposed under the combined action of temperature and mechanics. Reduced the defective rate of the products, making the products of the company more competitive in the same industry. EORT-V Chamber is more and more recognized and valued by more similar industries such as electronics, netcom, etc.
Specifications
|
Volume |
512L |
|
Inner size |
W800 mm×D800 mm×H800 mm |
|
Outer size |
According to drawings |
|
Weight |
1650 Kg |
|
Test environmental conditions |
The ambient temperature is + 25 ° C, the relative humidity is ≤85%, and there is no sample in the test chamber. |
|
Test method |
GB/T 5170.2—1996 Temperature test equipment GB/T 5179.2—1996 Humidity test equipment |
|
Temp. range |
-50℃～150℃ |
|
Hum. range |
15% ～ 98%RH |
|
Control accuracy |
a. Temp： 0.01℃ b. Hum：±0.1%RH |
|
Uniformity |
a. Temp：±2.0℃ b. Hum：+2.0%RH or-3.0%RH |
|
Stability |
a. Temp：±0.3℃ b. Hum：±2%RH |
|
Pre-heating temp. range |
+RT～+150℃ |
|
Heating time |
30min, Note: The temperature rise time is the performance when the heat storage zone operates alone. |
|
Pre-cooling temp. range |
-20℃ ～ -70℃ |
|
Cooling time |
70 min, Note: The cooling time is the performance when the low temperature area is operated alone |
|
Impact test method |
Pneumatic damper switching |
|
Temp. impact condition |
+25℃→+45℃：1min |
|
+45℃→+65℃：1min |
|
|
+65℃→+45℃：1min |
|
|
+45℃→-5℃：2min |
|
|
-5℃→-25℃：1min |
|
|
-25℃→+10℃：1min |
|
|
Stabilization time of heating impact |
5min |
|
Stabilization time of cooling impact |
8min |
|
Hum. range |
20%RH - 98%RH |
|
Relative humidity deviation |
±3.0%RH （Hum＞75%RH） ±5.0%RH （Hum≤75%RH） |
